inyector cc and resistor bosch for automotive

Bosch Number – cc/min – Impedancia (ohm)

0280150007 338 2.4
0280150008 338 2.4
0280150009 338 2.4
0280150016 406 2.4
0280150019 406 2.4
0280150030 338 2.4
0280150034 338 2.4
0280150035 406 2.4
0280150036 485 2.4
0280150038 406 2.4
0280150040 406 2.4
0280150041 485 2.4
0280150042 406 2.4
0280150043 485 2.4
0280150044 338 2.4
0280150045 406 2.4
0280150051 672 6.7
0280150052 586 6.7
0280150053 931 1.3
0280150055 1110 1.3
0280150057 855 1.3
0280150059 1154 1.3
0280150060 714 6.7
0280150063 1212 1.3
0280150065 812 1.3
0280150067 1055 1.03
0280150069 812 1.3
0280150070 468 10.0
0280150071 956 1.3
0280150105 191 2.4
0280150112 191 2.4
0280150114 191 2.4
0280150116 191 2.4
0280150117 191 2.4
0280150118 191 2.4
0280150119 191 2.4
0280150121 191 2.4
0280150123 196 2.3
0280150124 191 2.4
0280150125 196 2.3
0280150126 196 2.3
0280150128 196 2.3
0280150129 196 2.3
0280150130 191 2.3
0280150133 196 2.4
0280150134 196 2.3
0280150135 196 2.4
0280150151 247 2.4
0280150152 247 2.4
0280150153 247 2.4
0280150154 247 2.4
0280150157 242 2.4
0280150158 239 2.4
0280150159 252 2.4
0280150160 201 2.3
0280150161 196 2.4
0280150162 196 2.4
0280150163 196 2.4
0280150164 196 2.4
0280150165 242 2.4
0280150166 247 2.4
0280150200 314 2.4
0280150201 247 2.4
0280150203 200 16.2
0280150204 200 16.2
0280150205 200 16.2
0280150206 200 16.2
0280150207 200 16.2
0280150208 155 16.2
0280150209 200 16.2
0280150210 155 16.2
0280150211 155 16.2
0280150213 309 2.4
0280150214 200 16.2
0280150215 249 16.2
0280150217 200 16.2
0280150218 304 15.6
0280150219 200 16.2
0280150220 155 16.2
0280150221 155 16.2
0280150222 200 16.2
0280150223 249 16.2
0280150226 200 16.2
0280150227 200 16.2
0280150229 143 15.6
0280150230 192 16.2
0280150231 155 16.2
0280150232 227 16.2
0280150233 155 16.2
0280150234 200 16.2
0280150235 200 16.2
0280150237 155 16.2
0280150238 200 16.2
0280150239 227 16.2
0280150252 249 16.2
0280150254 249 16.2
0280150255 243 16.2
0280150257 200 16.2
0280150300 199 2.4
0280150302 199 2.4
0280150303 199 2.4
0280150306 505 2.4
0280150309 199 2.4
0280150310 199 2.4
0280150314 199 2.4
0280150315 199 2.4
0280150318 199 2.4
0280150319 199 2.4
0280150320 199 2.4
0280150321 199 2.4
0280150322 199 2.4
0280150323 199 2.4
0280150324 199 2.4
0280150325 199 2.4
0280150326 199 2.4
0280150327 199 2.4
0280150334 199 2.4
0280150335 199 2.4
0280150351 638 0.7
0280150352 248 2.4
0280150353 143 2.3
0280150354 143 2.3
0280150355 315 2.4
0280150357 317 2.4
0280150360 248 2.4
0280150361 270 2.4
0280150362 248 2.4
0280150363 638 0.7
0280150364 248 2.4
0280150365 248 2.4
0280150366 173 2.4
0280150367 173 2.4
0280150368 239 2.4
0280150369 239 2.4
0280150370 173 2.4
0280150371 173 2.4
0280150400 472 2.3
0280150401 472 2.3
0280150402 369 2.4
0280150403 536 2.3
0280150413 205 15.9
0280150414 160 15.9
0280150415 160 15.9
0280150416 156 15.9
0280150417 156 15.9
0280150418 273 15.9
0280150419 206 14.5
0280150420 315 14.5
0280150421 200 15.9
0280150422 346 15.9
0280150423 205 15.9
0280150424 180 15.9
0280150425 180 15.9
0280150427 250 15.9
0280150428 205 15.9
0280150429 205 15.9
0280150431 346 12.0
0280150432 249 14.5
0280150433 249 12.0
0280150438 177 13.8
0280150439 173 13.8
0280150440 200 14.5
0280150441 180 15.9
0280150442 180 15.9
0280150443 200 14.5
0280150444 156 12.0
0280150445 156 12.0
0280150446 182 14.5
0280150447 224 12.0
0280150448 224 12.0
0280150449 248 15.9
0280150450 347 15.9
0280150452 249 14.5
0280150453 283 14.5
0280150454 199 15.9
0280150455 229 12.0
0280150456 199 15.9
0280150457 156 12.0
0280150458 156 12.0
0280150459 173 12.0
0280150460 173 12.0
0280150461 249 14.5
0280150462 247 12.0
0280150463 199 15.9
0280150464 258 12.0
0280150465 258 12.0
0280150466 283 12.0
0280150467 283 12.0
0280150468 224 12.0
0280150469 224 12.0
0280150470 229 12.0
0280150500 200 15.9
0280150501 200 15.9
0280150502 249 15.9
0280150503 200 15.9
0280150504 249 15.9
0280150505 200 15.9
0280150506 249 15.9
0280150507 249 15.9
0280150508 180 15.9
0280150509 199 15.9
0280150550 283 14.5
0280150551 156 15.9
0280150552 156 15.9
0280150553 283 14.5
0280150554 283 14.5
0280150555 105 15.9
0280150556 200 14.5
0280150557 200 14.5
0280150558 435 14.5
0280150559 435 14.5
0280150560 200 15.9
0280150651 813 1.3
0280150653 1055 1.3
0280150655 1055 1.3
0280150657 893 1.3
0280150660 581 1.3
0280150661 622 0.78
0280150662 424 1.3
0280150663 480 1.3
0280150664 705 1.3
0280150665 631 1.3
0280150667 469 1.3
0280150669 714 1.3
0280150670 567 1.3
0280150671 468 1.3
0280150672 752 1.3
0280150673 907 1.3
0280150674 910 1.3
0280150676 593 1.3
0280150677 480 1.3
0280150678 861 1.3
0280150680 864 1.3
0280150682 680 1.3
0280150683 802 1.3
0280150684 673 1.3
0280150685 907 1.3
0280150686 469 1.3
0280150687 479 1.3
0280150688 749 1.3
0280150690 812 1.3
0280150691 586 1.3
0280150692 907 1.3
0280150693 586 1.3
0280150695 586 1.3
0280150697 751 1.3
0280150698 907 1.3
0280150699 752 6.7
0280150701 249 15.9
0280150702 200 15.9
0280150703 155 15.9
0280150704 200 15.9
0280150705 155 15.9
0280150706 248 15.9
0280150707 200 15.9
0280150708 155 15.9
0280150710 144 14.5
0280150711 200 15.9
0280150712 248 15.9
0280150714 200 15.9
0280150715 155 15.9
0280150716 155 15.9
0280150718 199 14.5
0280150719 155 15.9
0280150720 155 15.9
0280150721 200 15.9
0280150722 200 15.9
0280150725 200 15.9
0280150726 204 14.5
0280150727 144 14.5
0280150728 248 14.5
0280150729 200 15.9
0280150730 201 15.9
0280150731 201 15.9
0280150734 200 15.9
0280150736 199 15.9
0280150737 315 15.9
0280150738 315 15.9
0280150740 156 15.9
0280150741 200 15.9
0280150742 200 14.5
0280150743 200 15.9
0280150744 250 15.9
0280150745 218 14.5
0280150746 287 14.5
0280150747 200 15.9
0280150748 155 15.9
0280150749 227 15.9
0280150750 144 14.5
0280150751 200 15.9
0280150752 155 15.9
0280150754 247 14.5
0280150756 303 14.5
0280150757 200 15.9
0280150758 249 15.9
0280150759 246 14.5
0280150760 200 15.9
0280150761 248 15.9
0280150762 200 15.9
0280150763 197 14.5
0280150764 200 15.9
0280150766 200 15.9
0280150767 144 14.5
0280150769 200 15.9
0280150770 200 14.5
0280150771 155 15.9
0280150773 156 15.9
0280150774 211 14.5
0280150775 248 15.9
0280150776 200 15.9
0280150777 303 14.5
0280150778 200 14.5
0280150779 200 15.9
0280150783 200 15.9
0280150784 315 15.9
0280150785 315 14.5
0280150786 242 15.9
0280150788 211 14.5
0280150789 155 15.9
0280150790 199 15.9
0280150791 414 12.0
0280150792 254 15.9
0280150793 115 15.9
0280150802 310 2.4
0280150803 381 4.6
0280150804 311 2.4
0280150806 310 2.4
0280150808 310 2.4
0280150810 310 2.4
0280150811 277 2.4
0280150812 211 2.4
0280150813 310 2.4
0280150814 310 2.4
0280150818 248 2.4
0280150819 248 2.4
0280150820 248 2.4
0280150821 185 2.4
0280150823 200 2.4
0280150824 201 4.6
0280150825 195 2.4
0280150826 232 2.4
0280150827 232 2.4
0280150828 218 2.4
0280150829 211 2.4
0280150830 200 2.4
0280150831 200 2.4
0280150834 321 3.0
0280150835 321 3.0
0280150837 1606 4.6
0280150838 1606 4.6
0280150842 1606 4.6
0280150845 645 2.4
0280150901 195 14.5
0280150902 205 15.9
0280150903 205 15.9
0280150905 255 15.9
0280150906 255 15.9
0280150911 306 14.5
0280150912 306 14.5
0280150913 249 14.5
0280150914 249 14.5
0280150917 200 14.5
0280150921 156 15.9
0280150922 156 15.9
0280150923 319 14.5
0280150924 319 14.5
0280150925 198 14.5
0280150926 198 14.5
0280150927 230 14.5
0280150928 230 14.5
0280150929 158 14.5
0280150930 158 14.5
0280150931 200 15.9
0280150932 315 15.9
0280150933 315 15.9
0280150934 306 14.5
0280150935 180 2.4
0280150936 197 2.4
0280150937 144 14.5
0280150938 144 14.5
0280150939 200 14.5
0280150940 200 14.5
0280150941 144 14.5
0280150942 144 14.5
0280150943 200 14.5
0280150944 200 14.5
0280150945 306 14.5
0280150946 306 14.5
0280150947 249 14.5
0280150948 249 14.5
0280150951 273 15.9
0280150952 273 15.9
0280150953 196 15.9
0280150954 196 15.9
0280150955 182 15.9
0280150956 182 15.9
0280150957 232 14.5
0280150958 232 14.5
0280150960 200 14.5
0280150962 200 15.9
0280150963 194 12.0
0280150964 194 12.0
0280150965 230 12.0
0280150966 230 12.0
0280150967 359 14.5
0280150968 359 14.5
0280150969 298 2.4
0280150971 218 14.5
0280150972 229 15.9
0280150973 203 12.0
0280150974 315 14.5
0280150975 220 15.9
0280150976 200 15.9
0280150977 205 15.9
0280150978 205 15.9
0280150979 215 15.9
0280150980 215 15.9
0280150981 182 14.5
0280150982 200 14.5
0280150983 200 15.9
0280150984 359 14.5
0280150985 399 14.5
0280150987 154 14.5
0280150988 249 14.5
0280150989 182 15.9
0280150990 182 15.9
0280150991 229 15.9
0280150992 229 15.9
0280150993 115 15.9
0280150995 90 14.5
0280150996 138 12.0
0280150997 105 15.9
0280150998 228 12.0
0280150999 228 12.0
0280155002 259 15.4
0280155003 277 15.4
0280155007 200 2.4
0280155008 200 15.4
0280155009 315 15.4
0280155010 307 15.4
0280155012 296 14.25
0280155013 277 15.4
0280155101 244 12.0
0280155104 319 14.25
0280155201 206 14.25
0280155203 206 14.25
0280155205 206 14.25
0280155209 206 14.25
0280155213 201 15.4
0280155216 186 15.4
0280155217 206 14.25
0280155219 206 14.25
0280155503 199 14.5
0280155504 245 14.5
0280155505 200 15.35
0280155600 177 14.5
0280155602 272 12.0
0280155604 146 14.5
0280155606 226 14.5
0280155607 275 11.0
0280155609 200 14.5
0280155611 273 11.0
0280155613 182 12.0
0280155700 200 14.5
0280155702 231 12.0
0280155703 182 14.5
0280155705 182 14.5
0280155706 182 14.5
0280155707 144 14.5
0280155708 144 14.5
0280155710 200 14.5
0280155712 213 16.0
0280155715 249 14.5
0280155721 247 12.0
0280155723 239 14.5
0280155724 229 16.0
0280155725 200 14.5
0280155731 100 14.5
0280155734 249 14.5
0280155735 200 14.5
0280155739 292 14.5
0280155740 231 12.0
0280155742 171 14.5
0280155744 206 14.5
0280155746 200 16.0
0280155748 200 16.0
0280155749 347 16.0
0280155750 249 16.0
0280155753 122 14.5
0280155756 141 14.5
0280155757 206 14.5
0280155758 206 14.5
0280155759 315 16.0
0280155761 154 14.5
0280155763 100 12.0
0280155764 100 16.0
0280155765 182 14.5
0280155766 347 16.0
0280155769 182 14.5
0280155770 182 14.5
0280155773 154 14.5
0280155774 283 14.5
0280155777 200 12.0
0280155780 247 12.0
0280155782 231 12.0
0280155784 231 12.0
0280155786 105 14.5
0280155787 182 14.5
0280155788 315 16.0
0280155789 229 12.0
0280155791 182 16.0
0280155793 100 16.0
0280155794 141 14.5
0280155795 120 12.0
0280155798 292 14.5
0280155800 182 14.5
0280155803 200 14.5
0280155804 347 12.0
0280155807 200 14.5
0280155808 154 14.5
0280155809 182 14.5
0280155810 154 14.5
0280155811 347 12.0
0280155812 100 12.0
0280155814 122 14.5
0280155816 154 14.5
0280155819 182 14.5
0280155820 200 14.5
0280155821 200 14.5
0280155822 229 14.5
0280155823 200 14.5
0280155824 182 14.5
0280155825 235 12.0
0280155828 235 12.0
0280155830 347 12.0
0280155831 315 12.0
0280155832 249 12.0
0280155835 154 12.0
0280155837 100 14.5
0280155839 259 14.5
0280155842 154 14.5
0280155843 120 14.5
0280155844 200 14.5
0280155845 249 14.5
0280155846 141 14.5
0280155847 154 14.5
0280155848 200 16.0
0280155869 283 14.5
0280155870 154 14.5
0280155871 200 14.5
0280155872 200 12.0
0280155874 182 14.5
0280155876 200 14.5
0280155884 182 14.5
0280155885 154 14.5
0280155886 120 14.5
0280155887 182 14.5
0280155892 358 12.0
0280155894 322 12.0
0280155895 321 12.0
0280155897 289 12.0
0280155899 257 12.0
0280155900 200 14.5
0280155905 97 14.5
0280155919 100 14.5
0280155921 182 14.5
0280155927 257 12.0
0280155933 200 12.0
0280155936 182 14.5
0280155940 211 14.5
0280155942 164 14.5
0280155962 141 14.5
0280155963 200 14.5
0280155964 100 16.0
0280155965 100 14.5
0280155967 200 14.5
0280155968 412 12.0
0280155969 154 14.5
0280155970 200 14.5
0280155971 154 14.5
0280155976 210 12.0
0280155978 229 14.5
0280155981 120 14.5
0280155983 229 14.5
0280155985 229 14.5
0280155988 200 14.5
0280155993 182 14.5
0280155994 182 14.5
0280155995 182 14.5
0280155997 182 14.5
0280156001 182 14.5
0280156002 182
0280156003 200 12.0
0280156005 154 12.0
0280156006 200 12.0
0280156009 200 12.0
0280156010 182 12.0
0280156011 182 12.0
0280156012 412 12.0
0280156013 229 12.0
0280156014 171 14.5
0280156016 206 14.5
0280156018 182 14.5
0280156019 182 14.5
0280156021 315 14.5
0280156022 283 16.0
0280156023 347 16.0
0280156024 200 14.5
0280156025 100 14.5
0280156026 315 14.5
0280156027 141 14.5
0280156028 249 14.5
0280156034 154 14.5
0280156038 229 14.5
0280156039 182 14.5
0280156040 315 14.5
0280156045 200 14.5
0280156050 141 14.5
0280156052 257 12.0
0280156053 249 12.0
0280156057 182 14.5
0280156058 80 14.5
0280156059 200 14.5
0280156061 289 12.0
0280156063 358 12.0
0280156065 252 12.0
0280156067 154 14.5
0280156070 252 12.0
0280156072 412 14.5
0280156074 259 14.5
0280156078 229 14.5
0280156079 248 12.0
0280156080 200 14.5
0280156083 154 14.5
0280156084 154 14.5
0280156091 249 12.0
0280156094 182 14.5
0280156095 315 14.5
0280156101 249 12.0
0280156102 412 12.0
0280156103 182 14.5
0280156104 182 14.5
0280156105 182 14.5
0280156107 249 14.5
0280156108 200 14.5
0280157001 412 12.0
0280157002 160 12.0
0280157004 257 12.0
0280157005 257 12.0
0280157006 257 12.0
0280157008 289 12.0
0280159709 289 12.0
0280159712 213 16.0
0280159724 229 16.0
0280159731 100 14.5
0280159732 100 14.5
0280159798 292 14.5

This practice is to use object recognition labview providing us to build a system of facial identification. “>Once only identifiacada our face and our face, another program and the screen that will allow us through our voice, the management of cnc opens. The second part of the program consists of a chamber adapted to cnc with this camera diferntes identify objects, one of which must be a qr, another should be a text and one must measure the length of an object (in our case a small screw , microcontroller or something like that.

Our first thought is to use the builder to create a patter macht, and locate our face, but we think that facial identification is done with a camera (in our case the web computer itself), and the second part of the program identify where the different objects, will be performed by your web camera, the problem we found is that when migrating from builder to labview, we will identify problems cameras therefore we will express facial identification using labview.

1-perform facial express identification with vi.

Sin título1

open this box,click into two times

Sin título2

select the option of continuous acquisition to move on the screen and they seek reference from our patter at all times

Sin título3

assintant open the vision and realize the ROI to locate our face.

Sin título4

Sin título5

In the next part, we decided to give a message reception using the automated computer voice synthesizer using a wav format.
We also perform the call to close this sub vi and vi. all this will be done if the image is recognized.Sin título6

Sin título7

2-We will perform voice control

Sin título

use some commands for speech recognition, using these commands add a led to indicate the address to which we send the cnc.

To configure the daq after receiving the order with which preset cnc control, select an output or other.

Sin título2

I saw this shared variables first appear of which later talk.

Sin título3

qr

tolosa

medida

we opened the builder and programing whit other camera web

In this case, we use a file image save in pc.

Sin título10

whit vision assistant delete a colour (i prefer red) for use biggest contrast.

Sin título11

we use calibration builder and training.

Sin título13

 

Sin título14

detection vision builder

In this practice we need to identify a number of elements using artificial vision.

First open the device manager, and we found that our pc detects the camera with which we will work, in this case a hercules, and start the NI builder

Sin título

Stítulo

We use vision builder of labview.The first step is to configure the camera that captures pictures
uma good recommendation is to create pictures in black and white for use as contrast detection tool

.qo

First we acquire an image and regulate the possibilities of web camare brilo to adjust, contrast etc …

Sin título1

Sin título2

In this case we use a picture of the project to explain the process, as the tutorial is done after submitting the project.

2 – Select objet detection to know how many objects are in the picture for further consideration, we select a region of interest ROI that encompasses all components yreducimos red to create a greater contrast and well differentiate the various test objects.

Sin título3

Sin título4

we pulse ok.

Sin título

3 – We use the classification of objects, we will train you in the category and the vision to know that later differentiate different objects, for it within the object will use threshold calsificación.

Sin título1

Sin título3

use the option of ignoring small regions that do not interest us and may confuse identification

Sin título5

Sin título6

4 – We use the calculator logic to relate the number of parts that we have or how many pieces of each type, this relation, customer becomes a function of the needs expressed.

Sin título7

Sin título8

5 – We will make a custom overlay only to indicate whether or not there are transistors with a light signal, which we show in green if it is positive or negative and red if there is no image on the transistors.

Sin título10

Sin título11

Sin título12

 

motor control with arduino

This practice will be divided into several parts:

1 – The operation of a DC motor through a plate connected to an arduino proximity sensor infrared.

2 – the sofweare used the toolkit that will give users labview arduino.

3 – view of the external temperature via a temperature sensor connected to Arduino

Failure to have the Arduino toolkit, we explain how to do it.Open labview vi and its tools packege manager front panel, we need to have internet. download the toolkit from arduino.

n título

First we proceed to connect the Arduino to USB, go to device manager and see the port used.

Sin títuo

will use the arduino version 1.0.5 and not 1.5.5 version no longer works properly with labview.

Go to the folder where it saved labview, to libraries and look for a folder called lifa (intwrface labview for arduino), we will use this folder to load the arduino firweare

in título

soft opened within the arduino and compile Base_ino

Sin tulo

I once managed to connect the Arduino with labview and ensure we have the kit in labview arduino had to make our programming, which will open the resource arduino, we will read data and application will close.

Sin títlo

we note that the arduino does not have analog outputs, use the pwm to simulate an analog output, so when the base power optocoupler we note that the output volts (5v) MUST be divided by the number of bits pwm that when 8 bit has a sensitivity of 255 readings.

we will see the Developer Dashboard

1 – chose the com port that the arduino, we open resource.
2 – For controlling the temperature perform a reading analog input pin coupled to the temperature sensor, this kit and gives you the value in volts / division (5v/255) so the result is in volts, and can be used directly multiplying out these mv x 100 and connecting it to the box read.
we use a for reading and the average reading to be less variable
3We conducted the same operation with the infrared sensor, We receive the analog data, second reading and writing at the output of one of the pins as pwm let us use (as described above)

4 – We can see that according to the value of the infrared sensor reading a boolean that feeds us a picture or another is activated, resulting in proportion to the engine feed

Sin tít

we see the panel of Owners

Si título

we will perform a simulation of assembly and submit the a picture of how it is, I apologize for the apparent disorder of the installation, but the means are available to me.

2014-02-17 17.07.10

we will use this board as we bilbao mse supplies all the necessary sensors for the realization of this practice

2014-02-17 17.07.33

Connection form is shown below, I have not considered the engine protection diode or bypass capacitors, and the resistance of the LED, which is appreciated in real photography

mierda

IMG_20140213_121552

Database

In this practice we will create a database that will work within the create database tables that will be subsequently plotted in a single Wavefrom.

The initial conditions of the tables are:
1 – measure the speed of wind distributed 24 hours a day
2 temperature measurement day divided in 24 hours a day
3 Pressure measuring distributed in 24 hours a day

The program should have 3 buttons that allow us to eliminate each of the graphs to our choice.

The program should have a button with which we will create a table in the database and on the other that can be entered:
name of the table
column
data
Finally the program should have a button with which to delete a table from the database to our choice.

Start creating an on acces a database containing different tables

bd

db1

Once you have created three tables store the file, in my case I keep with mdb extension, later using the jet 4 OLE provider, if we leave the accdb extension office 12 use the database engine supplier.
To save the file with mdb extension, save the file as compatible file access 2003

db2

proceed to open labview and enter tools, data link and we create the list of providers who choose appears as said above the jet 4 OLE microssoft.

DB3

had to seek connections and database with mdb extension chosen in our case, so we created the udl file (universal data link) that allow us to communicate with the database using ADO.

check the connection

db4

keep the udl file in the folder where you have the vi.

begin to use the kit to work with the database table created in access, enter the Developer Dashboard, database conectivity.

begin to use the kit to work with the database table created in access, enter the Developer Dashboard, database conectivity.
The first thing to do is to open the connection, we use tools conecttion open, create a constant is added to the address you created earlier udl

bd5

 from this point, we can connect to the database, we will use the selection tool table to communicate with the chosen table

db6

after selecting the table we use the data type that gives us a tool for organizing it with array, jerarquizamos and transform it to read the waveform, we use to do the following types of tools

db7

to create tables and borrarlaas within the database will use tools called kit, tools insert data (where you can enter data by monitoring and elected by a Boolean constant creation create table if not already created)
have another way to create database table with the kit, using the tool create table tool.
control and will use a tool to remove the table drop table chosen tools

db8

Therefore we will use the property node to clear the graphs as the graph to restart once read

db9

we see how the program is completed in the developer environment

db10

we see how the program terminated user environment, where we see the graphic is selected

db11

following the instructions of the programmer screen.
1 – press the switch to create table
2fill the fields of the table you want to create
3 activate the saw giving run.
the same is true if we delete a table.
to check if the table to be created or deleted access pass to the program and check

db12

db13

db14

db15

Now we will see some minor changes to the program.with these modifications we can add more columns and enter data independently.also modify the saw to use it with a project.

ppe

Si

Use of cnc

we will make a small tutorial to help colleagues who want to use the cnc at our disposal in the center CIFPN1.

The first step that should be clear is that we will make in our case manufacture a plate with alphanumeric and graphic lcd various communication systems and management as buttons rs232 jumpers etc …..

1.We show the template of the plate we will make, after adjusting the tracks, put the tracks and place items and new tracks

S

2. We generate gerber file that we use to manufacture the plate

S1

S2

choose the layers that generate the files:
-drill
-bottom
top
-edge
mech1 (if we make inscriptions on it)

S3

3.transported on a pen layers and gerber files created in the

2013-12-11 12.08.06

2013-12-11 12.09.05

4.We light the orednador that is connected to the switch on the cnc and cnc and shown Boad Circuit Cam and Master programs

2013-12-11 11.44.36

5.Open the folder where you will see the contents of all files and keep colleagues

2013-12-11 12.09.39

6.Cnc and note the plates or if retired and spent the bits to make a new plate fiducial, fiducial to use a 3mm drill

2013-12-11 11.50.34

to place both the plate and the drill must send a cnc parking

2013-12-11 11.45.33

put the new board in place and drill 3 mm in the first position, we hold the plate with electrical tape or heat

2013-12-11 12.27.06

2013-12-11 11.54.03

open the Master sof Boad and choose the option and plated drill bit 3mm

2013-12-11 11.56.04

cnc send the home, placing the head on the left fiducial site, we now turn to press the option to manually turn

2013-12-11 11.58.03

maualmente had to move down to the z axis to make the hole first fiducial

2013-12-11 11.58.33

2013-12-11 12.02.12

put the plate on the right and repeat the operation fiducial and select leave the bit in place. (Quickload)
After doing that we send to the parking cnc to remove the 3mm drill

2013-12-11 12.03.51

7.Since the fiducial made ​​an continue moving files Circuit Cam

2013-12-11 12.10.29

select the files, remove the readme that will not use the rest of the files execute

2013-12-11 12.11.11

program at this point we appear different layers and we exported them names so they could later identify

2013-12-11 12.12.31

2013-12-11 12.11.40

2013-12-11 12.13.19

2013-12-11 12.13.28

2013-12-11 12.12.14

this screen appears with the faces of the plate exported

2013-12-11 12.20.05

8.On the left side choose the board edge and we generate

2013-12-11 12.10.45

9.isolate the net

2013-12-11 12.14.08

We choose in Spanish language (aislar) tool path and change the parameters of distance between net default 1.2 to 0.3 had the top face (ejecutamos) then choose the bottom face and (ejecutamos)

modificado

the next picture is isolated net

2013-12-11 12.20.32

10.the next step is to open the Master Board

2013-12-11 12.20.47

export files to Borad Master Cad cam

2013-12-11 12.21.13

2013-12-11 12.21.22

11.select the face to work, we selected drill to make holes

2013-12-11 11.56.04

review the drills that we will use and put them on the cnc teach following the steps above

2013-12-11 12.21.41

put bits on the screen in the order that indicates the program

2013-12-11 12.23.51

select all and start

2013-12-11 12.32.01

2013-12-11 12.36.19

just have to wait

2013-12-11 12.36.24

2013-12-11 11.45.40

the end.

 

What Is Data Acquisition (DAQ)?

 

Data acquisition (DAQ) is the process of measuring an electrical or physical phenomenon such as voltage, current, temperature, pressure, or sound with a computer. A DAQ system consists of sensors, DAQ measurement hardware, and a computer with programmable software. Compared to traditional measurement systems, PC-based DAQ systems exploit the processing power, productivity, display, and connectivity capabilities of industry-standard computers providing a more powerful, flexible, and cost-effective measurement solution.

Parts of a DAQ System

What Is a Sensor?

The measurement of a physical phenomenon, such as the temperature of a room, the intensity of a light source, or the force applied to an object, begins with a sensor. A sensor, also called a transducer, converts a physical phenomenon into a measurable electrical signal. Depending on the type of sensor, its electrical output can be a voltage, current, resistance, or another electrical attribute that varies over time. Some sensors may require additional components and circuitry to properly produce a signal that can accurately and safely be read by a DAQ device.


Common Sensors

Sensor Phenomenon
Thermocouple, RTD, Thermistor Temperature
Photo Sensor Light
Microphone Sound
Strain Gage, Piezoelectric Transducer Force and Pressure
Potentiometer, LVDT, Optical Encoder Position and Displacement
Accelerometer Acceleration
pH Electrode pH

More Information About Choosing and Using Sensors

What Is a DAQ Device?

DAQ hardware acts as the interface between a computer and signals from the outside world. It primarily functions as a device that digitizes incoming analog signals so that a computer can interpret them. The three key components of a DAQ device used for measuring a signal are the signal conditioning circuitry, analog-to-digital converter (ADC), and computer bus. Many DAQ devices include other functions for automating measurement systems and processes. For example, digital-to-analog converters (DACs) output analog signals, digital I/O lines input and output digital signals, and counter/timers count and generate digital pulses.


Key Measurement Components of a DAQ Device

Signal Conditioning

Signals from sensors or the outside world can be noisy or too dangerous to measure directly. Signal conditioning circuitry manipulates a signal into a form that is suitable for input into an ADC. This circuitry can include amplification, attenuation, filtering, and isolation. Some DAQ devices include built-in signal conditioning designed for measuring specific types of sensors.


Analog-to-Digital Converter (ADC)

Analog signals from sensors must be converted into digital before they are manipulated by digital equipment such as a computer. An ADC is a chip that provides a digital representation of an analog signal at an instant in time. In practice, analog signals continuously vary over time and an ADC takes periodic “samples” of the signal at a predefined rate. These samples are transferred to a computer over a computer bus where the original signal is reconstructed from the samples in software.


Computer Bus

DAQ devices connect to a computer through a slot or port. The computer bus serves as the communication interface between the DAQ device and computer for passing instructions and measured data. DAQ devices are offered on the most common computer buses including USB, PCI, PCI Express, and Ethernet. More recently, DAQ devices have become available for 802.11 Wi-Fi for wireless communication. There are many types of buses, and each offers different advantages for different types of applications.

What Is a Computer’s Role in a DAQ System?

A computer with programmable software controls the operation of the DAQ device and is used for processing, visualizing, and storing measurement data. Different types of computers are used in different types of applications. A desktop may be used in a lab for its processing power, a laptop may be used in the field for its portability, or an industrial computer may be used in a manufacturing plant for its ruggedness.